LED Bulbs

Choosing the Right Power Supply for Your 24V RGBW LED Strip

24V RGBW LED stripsChoosing the right LED strips goes beyond just matching voltage. It takes into consideration many factors—ensuring optimal performance, durability, and safety. Through red, green, and blue diodes, RBGW strips deliver vibrant colour mixing and optimized brightness—which demands stable, precise power delivery. An undersized or oversized power supply can lead to flickering, uneven lighting, lower lifespan, and fire hazards. That’s why you should get it right. On those lines, here are tips and tricks for choosing the right power supply for your 24V RGBW LED strip.

Key Steps

Installing LED Strip LightsHere are key steps to follow:

Verify Voltage

First, confirm the voltage of your LED strip. Confirm whether indeed a 24V DC. Ensure that the power supply matches its voltage. For instance, a 24V RGBW LED strip requires a 24V-rated power supply.

Compute Total Wattage

Calculate the power consumption of the strip (i.e., per meter or foot). From here, proceed to multiply the total length you are using. For instance, if the consumption is 10W/m and you have 3 meters, it will result in 30W.

Add Power Buffer

Next, consider adding the power buffer. This is the safety margin on the strip. It’s usually around 20 to 30 percent of the calculated wattage. Here is an example to help you understand better:

Consider a 30W strip. Here, aim for more than 30W*1.3, which results in 39W. In this case, you can choose a 40W or 60W power supply.

Dimming

Installing LED Strip LightsDo you intend to use an external controller (such as a PWM dimmer) to dim your lights? Well, in this case, choose a non-dimmable power supply. You can only opt for a dimmable power supply if you intend to dim your strips via a compatible AC wall dimmer.

Environment And Quality

Consider the environment and air quality. Here are a few guidelines to get you going:

  • Indoor Environment (Dry): For indoor use, where the environment is dry, opt for standard plastic-cased power supplies.
  • Outdoor/Damp Environment: If you plan to use it in outdoor settings, which are prone to dampness, go for an Ingress Protection (IP) rated power supply. These power supply units are designed to resist water penetration.
  • Certification/ Licensing: It’s also important to consider the certifications. In this case, consider looking for UL listing and other similar quality marks. This will not only optimize safety but also guarantee durability. 

Example

Here is an example to consider: Suppose you have found a certain strip product and want to see how it works for your lighting. Here are the steps to follow:
Step One: Determine the Voltage

First, check the voltage of your LED strips. Most LED strips can run on 12V DC. Others run on 24V DC. Go to the product description and look for the rating of your LED strips. 
If you still cannot find the details, inspect the product photo. Most products come with clear marks indicating the voltage of the product.

Next, it’s the power supply. Check its rating. Ensure that it matches your 24V RGBW LED strip. For our case, the rating of the power supply is 12V. Thus, it is a good match.

It’s also important to check the voltage on the supply’s AC side. Confirm that it matches the voltage of your country. In the UK, it’s 120V.

Step Two: Determine the LED Strip’s Power Draw

Next, check the LED Strip’s Wattage or Amperage specifications. In most cases, this is listed as W/m or A/m. It can also be listed as W or A.

The 24 LED strip’s total wattage is indicated as 24 Watts or 4.8 Watts per meter. This works. This is because a standard strip comes in 5 meters per reel. This makes the total wattage 24 Watts.

The amperage may not be listed here. However, you can calculate it using the formula P=VA. P stands for power, V for voltage, and A for amperage. In this case, it will be 24 = 12 x A, which results in A=24/12. This makes Amperage 2.0 Amps.
In Electrical Engineering, it’s evident that at 12V, the strip draws around 24 Watts per reel (five meters), or around 2.0 Amps.
Step Three: Connection method

Finally, check the power connectors that come with the power supply unit. Ensure that it’s compatible with your LED strip. In most cases, a 5.5 mm x 2.25 mm doesn’t work with most LED strip plugs.
The Bottom-Line

LED Strip ChannelsWhen buying your RGBW strip, consider durability, performance, and safety. You must accurately calculate the total wattage, factor in a safety margin before choosing your power supply. Professional-grade installations demand that you choose high-quality power supply units for your RGBW. This is the backbone of a flawless lighting system. The above are tips and tricks for choosing the right power supply for your 24V RGBW LED strip.

Leave a Reply

Your email address will not be published. Required fields are marked *