There is no product that matches the search criteria.
Your cart is empty.
Vintage filament candle bulbs combine a narrow candle shape with a visible filament, making them a decorative choice for compatible chandeliers, wall lights and other fittings where the lamp can be seen. The current selection includes a 40W bent-tip candle bulb and miniature 25W filament bulbs with E10, E12 and E14 screw caps. Check the individual product page for its exact dimensions, voltage, light output and other specifications.
Start with the cap used by your light fitting. This range includes E10, E12 and E14 screw bases; they are different sizes and are not interchangeable. Compare the marking on the existing bulb with the fitting instructions, or use our light bulb cap and fitting guide if you are unsure. Do not choose by the glass shape alone.
Candle bulbs are often used in open chandeliers and decorative wall fittings, but the available clearance still matters. Compare the bulb’s height and widest diameter with the space inside the shade. Bent-tip and miniature bulbs have different shapes, so check the product image and dimensions before ordering. Also confirm that the wattage does not exceed the maximum printed on the fitting.
Wattage describes electrical power use, not brightness. Where the product page lists lumens, use that figure to compare light output with your existing lamp. Check the listed colour information to get the appearance you want; vintage styling alone does not determine the colour of the light.
Dimmability depends on the specific bulb and the dimmer used. Choose a lamp marked as dimmable and confirm that it is suitable for your dimmer circuit. If a lamp is not identified as dimmable, do not use it on a dimmer. For an LED alternative in a similar candle shape, browse our LED candle bulbs and check each model’s cap, dimensions and dimmer information.
Switch off the light and let the old bulb cool. Match the cap, voltage and maximum wattage required by the fitting, and make sure the new bulb sits securely without touching the shade. If the fitting’s rating is missing or you are unsure which base it uses, ask a qualified electrician before fitting a replacement.