Free Standard Delivery on orders over £75 except for large items. NEXT DAY delivery available for orders placed before 12:00
BROWSE
CART
Shopping Cart
0
COMPARE
WISHLIST

Accessories and Controls

Find the right LED strip controller for your lighting. Our range includes RGB LED controllers, RGBW controls, LED tape dimmers, DMX equipment and repeaters for compatible strip light installations. Whether you are adding colour to a room or setting up a larger lighting run, start with the type of LED tape you are using.

Shop LED strip controls by type

  • RGB LED strip controllers – control colour-changing RGB tape. Compare the CT302-RF RGB controller with your tape specification, channel arrangement and control requirements.
  • RGBW LED controllers – for compatible four-channel RGBW strip where a separate white channel is needed. Check the controller and tape connection type before ordering.
  • LED strip dimmers – adjust light levels on compatible single-colour tape. A standard white LED tape dimmer is not a substitute for an RGB colour controller.
  • DMX controls and decoders – suitable for compatible multi-zone or more advanced installations. Match the decoder channels and signal system to the controller.
  • RGB data repeaters – extend the control signal to additional compatible loads. View the three-channel RGB data repeater RP306 for the listed connection and capacity details.

Check compatibility before you buy

An LED strip controller needs to suit the tape, not just the look of the remote. Check whether your strip is single colour, RGB or RGBW, then confirm the operating voltage, channel count and total load. If you are using several lengths of tape, calculate the combined wattage and check the controller’s rated capacity. Larger installations may need a suitable repeater or separate power supplies.

Also check how you want to operate the lights. Some controllers use a handheld remote, while others are intended for a DMX system. Make sure the controller, remote and receiver work together; similar-looking products are not always interchangeable.

Complete your LED tape installation

Buying a controller alongside your tape? Browse our 12V LED strip lights and 24V LED tape to compare compatible strips, then check the correct LED drivers for the installation. Our controllers and accessories are listed individually, so refer to the product specifications for included components and connection details.

Choosing controls for a simple or multi-zone setup

For a straightforward single-colour under-cabinet strip, a compatible dimmer may be all you need. RGB tape is different: the controller needs to manage separate colour channels so you can select and change the colour. RGBW strips also have a dedicated white channel, which is why an RGB-only controller is not always the right choice. Checking the strip type first avoids ordering controls that cannot deliver the lighting effect you want.

Think about where you will use the lights, too. For a living room feature, you may prefer an easy-to-use remote. For shop displays or a larger installation, a control arrangement that manages several sections together may be more useful. When comparing products, look at how many channels each controller supports and whether you need a receiver, remote or decoder as a separate item. Do not assume a remote pictured with one product is included with another.

Planning longer LED strip runs

A controller can only supply the load it is rated for. As an example, a five-metre strip drawing 14.4W per metre needs 72W in total, before making any allowance required by the equipment manufacturer. Two such runs need a different capacity assessment from one short length. Check the electrical rating on the tape and controller rather than relying on a maximum-length claim alone.

An RGB data repeater may help you control additional compatible lengths without putting all their power demand through the first controller. It does not replace the need for correctly specified power supplies, suitable cabling or appropriate wiring. If your layout has several sections, plan the power and signal connections before buying individual accessories.

A quicker way to compare products

Check the product description in this order: strip colour type, voltage, controller output and channel count, then control method. Finally, confirm what is supplied in the box and what needs ordering separately. This gives you a practical shortlist of controllers that will work with the tape you already own, rather than choosing on appearance or price alone.

Browse the controllers above and choose the equipment that matches your LED tape and the way you want to control it.


Monthly Specials

Back to Top