Free Standard Delivery on orders over £75 except for large items. NEXT DAY delivery available for orders placed before 12:00
BROWSE
CART
Shopping Cart
0
COMPARE
WISHLIST

Halogen MR16 Down Lighter Bulbs

SORRY, There are no products to list in this category.

Halogen MR16 bulbs are reflector spot lamps used in compatible ceiling downlights, recessed spotlights and other directional fittings. They can provide focused light for task areas or for highlighting a feature. MR16 identifies the lamp format; check the cap, supply voltage and dimensions on your existing lamp before choosing a replacement. The halogen MR16 lamps previously listed in this category use a two-pin GU5.3 cap and a 12V supply.

This category currently has no active halogen MR16 lamps listed. For an alternative, compare our 12V MR16 LED spotlights and confirm compatibility with your fitting and transformer before ordering.

How to choose a compatible MR16 downlighter bulb

  • Cap: confirm the two-pin GU5.3 base matches the lampholder.
  • Voltage: match the lamp voltage to the fitting. A 12V lamp must not be connected directly to a 220–240V mains supply.
  • Transformer: check the transformer’s output and supported load range. A low-voltage replacement must operate within its stated limits.
  • Wattage and dimensions: follow the fitting’s maximum wattage and make sure the lamp fits within the available space.
  • Beam angle: compare the listed beam spread with the area you want to light; a narrower beam is more focused than a wider one.

Changing from halogen to LED

Before replacing a 12V halogen MR16 with an LED MR16, check the LED lamp’s voltage and AC/DC requirements and confirm that the transformer is suitable for the lower load. If you are unsure whether the existing transformer and lampholder are compatible, ask a qualified electrician to check the circuit.

Frequently asked questions

Does MR16 tell me which cap I need?

No. Check the cap marking on the original lamp. The halogen MR16 lamps previously listed here used a GU5.3 two-pin base.

Can I use a 12V MR16 lamp in a mains-voltage fitting?

No. A 12V lamp requires a compatible transformer and must not be connected directly to a 220–240V supply.

Back to Top