There is no product that matches the search criteria.
Your cart is empty.
These compact 12V LED deck lights can be set into decking, steps, kitchen plinths and other surfaces where you want a small, recessed point of light. The mini lights are sold in pre-wired packs of ten. The listed versions include warm-white and cool-white options, plus an RGB set for colour-changing effects with a compatible controller.
Each mini light is listed at 0.3W, with a 22mm outer diameter, a 17mm cut-out and an overall height of 35mm. Measure the surface and available depth before drilling, and check the supplied cable length and connection details on the selected product page. Plan the spacing and cable route before installation so the connectors and 12V DC power supply can be positioned where they remain accessible and protected.
Match the supply to the total load: multiply 0.3W by the number of lights, then confirm the supply’s output rating and connection type against the instructions. The category also lists a 12V 12W driver for the mini lights; check its product page and your total light count before choosing it. RGB lights require a compatible RGB controller as well as a suitable 12V DC supply.
The mini lights are specified as IP65. IP65 does not mean that a light can be submerged; protect the cable joints, connector, driver and installation points according to the product instructions and the conditions at the site. Do not assume that every accessory in the category has the same rating as the lights. For any mains-side installation, use a qualified electrician.
For the right set of plinth lights or lights fitted into deck boards, compare colour, pack contents, cut-out size, depth, controller and power supply before ordering. See our 12V LED drivers for compatible supply options, and check each product listing for its own connection requirements.