Free Standard Delivery on orders over £75 except for large items. NEXT DAY delivery available for orders placed before 12:00
BROWSE
CART
Shopping Cart
0
COMPARE
WISHLIST

Occupancy Sensors

Choose the right occupancy sensor for lighting control

An occupancy sensor automates lighting by responding to movement in a space. It can help provide convenient hands-free switching and reduce unnecessary lighting when a room is empty. The right sensor depends on the room, the lighting circuit and the control behaviour you need; sensing technology alone does not determine whether a model will suit your installation.

This range includes microwave occupancy sensors and models with different switching, dimming and daylight-control functions. Features vary by product, so use the individual listing to confirm what each sensor can do before choosing.

What to check before you choose

  • Coverage and mounting: Compare the stated detection pattern and mounting height with the room layout. Position the sensor to cover the occupied area and avoid aiming it at spaces where movement could cause unwanted switching.
  • Electrical load: Check the sensor's supply, switching method, maximum load and supported load types. LED drivers and dimmable lighting must be compatible with the sensor's output and control method.
  • Operating settings: Hold-time, ambient-light threshold, sensitivity, standby level and manual override are model-specific. Choose the controls you need and confirm how they are adjusted.
  • Installation environment: Check the product's IP rating and stated operating conditions for the intended location. Do not assume an indoor sensor is suitable for a damp or outdoor area.

Switching, dimming and daylight harvesting

Some sensors switch a lighting load on and off; others can provide additional control when used with compatible equipment. For example, the Hytronik HMW22 occupancy sensor is listed with daylight harvesting and 1-10V dimming. Those functions require a compatible lighting driver and correctly designed control wiring. They are not features to assume across every occupancy sensor.

Before ordering, compare the exact product specifications with your fittings, driver, wiring and room dimensions. If you are replacing an existing control, confirm the new sensor's connections and load rating rather than relying on the old unit's appearance. Mains and control wiring should be selected and installed by a suitably qualified person.

Back to Top