Free Standard Delivery on orders over £75 except for large items. NEXT DAY delivery available for orders placed before 12:00
BROWSE
CART
Shopping Cart
0
COMPARE
WISHLIST

24V LED Tape

SaleNew 24v LED Tape 7.2w/m IP20

24v LED Tape 7.2w/m IP20

£49.24  £22.87
Save: 54% off
SaleNew 24v LED Strip 7.2w/m IP20 RGB

24v LED Strip 7.2w/m IP20 RGB

£58.57  £25.51
Save: 56% off
SaleNew 24v LED Tape 7.2w/m IP65 ww

24v LED Tape 7.2w/m IP65 ww

£64.30  £26.88
Save: 58% off
New 24v LED Tape 7.2w/m IP65 RGB

24v LED Tape 7.2w/m IP65 RGB

£26.98
New 24v LED Strip 10w/m 98LED/m IP20

24v LED Strip 10w/m 98LED/m IP20

£29.98
SaleNew 24v LED Strip 14.4w/m IP20

24v LED Strip 14.4w/m IP20

£70.79  £33.80
Save: 52% off
SaleNew 24v LED Tape 14.4w/m IP20 RGB

24v LED Tape 14.4w/m IP20 RGB

£78.23  £35.40
Save: 55% off
SaleNew 24v LED Tape 14.4w/m IP65

24v LED Tape 14.4w/m IP65

£89.03  £39.41
Save: 56% off
SaleNew 24v LED Strip/Tape 14.4w/m IP65 RGB

24v LED Strip/Tape 14.4w/m IP65 RGB

£103.15  £35.52
Save: 66% off
New 24v High Density LED Tape 350LED/m 18W/m IP2024v High Density LED Tape 350LED/m 18W/m IP20

24v High Density LED Tape 350LED/m 18W/m IP20

£59.98

24V LED strip lights for longer planned runs

Choose 24V LED tape when your installation calls for a 24-volt system and you want to plan a continuous run of strip lighting. This category includes single-colour and RGB LED strips, with listed options at 7.2W/m, 10W/m, 14.4W/m and 18W/m. The range also includes IP20, IP65 and IP68 products, so compare the exact specification of each tape before choosing.

Match the tape, power supply and controller

Every 24V strip needs a compatible 24V constant-voltage power supply; it must not be connected directly to mains. Estimate the load by multiplying the strip’s stated watts per metre by the total length, then select a supply and any controller that are rated for that load and compatible with the tape’s colour type. RGB tape needs an RGB controller; single-colour tape needs a compatible single-colour control if dimming or switching is required. Check the product instructions for maximum feed length, connection method and any allowance required by the manufacturer.

For installation work involving the mains supply, use a suitably qualified electrician. Keep polarity and connection details in line with the product instructions.

Check the environment and finish

IP20, IP65 and IP68 are different protection ratings, not interchangeable descriptions. Select the exact product for its intended location and follow its instructions for joints, cut ends, connectors and sealing; the rating of the strip alone does not establish the protection of the complete installation. Where the tape will be visible, an aluminium LED strip channel can provide a neat mounting and diffuser option. Check each listing for colour, wattage, length and whether a suitable driver or accessories are supplied separately.

Before you order

  • Confirm that your existing system is 24V and measure the required run.
  • Choose single-colour or RGB tape, then check the listed watts per metre and IP rating.
  • Confirm that the power supply, controller, connectors and tape share the correct voltage and load rating.
  • Cut only at the marked points stated in the product instructions.

If your project uses a 12V system, browse our 12V LED strip lights instead. For a 24V driver, see our 24V LED drivers and check the driver specification against your chosen tape.

New Products For November - 24V LED Tape

Monthly Specials

Back to Top