Free Standard Delivery on orders over £75 except for large items. NEXT DAY delivery available for orders placed before 12:00
BROWSE
CART
Shopping Cart
0
COMPARE
WISHLIST

LED Dimmable Drivers

Mains-dimmable LED drivers in 12V and 24V

This range includes mains-dimmable LED drivers with 12V or 24V output and selected power ratings from 5W to 300W. A driver sits between the supply and the LED load, so the output voltage, driver type, total load and dimming method all need to match. Choosing a driver by wattage alone can lead to poor dimming, flicker, failure to start or damage to connected lighting.

“Mains-dimmable” describes a driver that is designed to be dimmed from the mains side with a compatible control. It does not mean the low-voltage LED strip or lamp is connected directly to 230V. The driver converts the supply for the specified low-voltage load. Always check the individual product information and the lighting manufacturer’s instructions before fitting.

Examples from the range

  • 12V mains-dimmable 5W LED driver: the product listing specifies TRIAC dimming, IP20 for dry areas and dimensions of 120 × 41 × 21 mm.
  • 24V mains-dimmable 300W LED driver: the product listing specifies a TRIAC-compatible dimmer, an IP67 rating and dimensions of 255 × 75 × 45 mm. Check its installation guidance and load limits for your application.

These are examples, not interchangeable choices. The rest of the range includes other output voltages and power ratings; use the product details to confirm the exact model specification, stock and suitability.

How to choose a dimmable LED driver

  1. Match output voltage. Select 12V for a 12V load or 24V for a 24V load. Do not connect a 12V LED strip or lamp to a 24V driver, or the reverse.
  2. Match the driver type. Many LED strips use constant-voltage drivers, while some luminaires require constant-current drivers. Follow the specification for the LED product; output current and voltage must be appropriate for that load.
  3. Size the load correctly. Add the wattage of the connected LEDs and stay within the driver’s stated operating range. Check any minimum load as well as the maximum, especially when replacing a halogen transformer with a lower-wattage LED load.
  4. Match the dimmer. A dimmable LED driver and LED dimmer must use compatible dimming technology. The 5W example specifies TRIAC dimming; check the model listing before pairing it with a wall dimmer, lighting control system or other controller. A dimmable LED bulb or strip also needs to support the chosen dimming arrangement.
  5. Check installation conditions. Compare the driver’s IP rating, enclosure size, ventilation needs and mounting instructions with the intended location. IP ratings and dimensions vary between models.

Drivers, dimmers and LED lighting

If lights do not dim smoothly, the cause may be a mismatch between the LED load, driver and dimmer, or a load outside the driver’s specified range. Confirm compatibility for all three components before replacing parts. Do not assume that an existing halogen dimmer or transformer will work with an LED driver.

Use the product page to verify the driver’s input, output, dimming method, power rating, protection rating and dimensions. For fixed mains wiring or uncertainty about the circuit, use a suitably qualified electrician. This helps you select the right dimmable LED driver and dimmer for your particular LED lighting system.

Back to Top