There is no product that matches the search criteria.
Your cart is empty.
Product 10/13
This 24V mains-dimmable LED driver is listed at 300W and is intended for compatible 24V constant-voltage LED lighting, including suitable LED strip. Confirm the supply voltage and load requirements of the connected lighting before selecting a driver.
Check that the LED tape or luminaire is designed for 24V constant-voltage operation and that the combined connected load stays within the driver rating. The product listing specifies TRIAC dimming, but compatibility varies between dimmer models and loads; check the dimmer manufacturer’s load range and instructions before use. This driver is not a replacement for a 12V supply or a constant-current driver.
For any 24V dimmable LED transformer, confirm constant-voltage output and dimmer compatibility. This model is listed as a 24V constant-voltage driver for mains TRIAC dimming, so verify both requirements against the connected LED load.
The driver is listed with an IP67 rating. That rating applies to the driver unit; it does not give the connected LED tape, cable joints or connectors the same protection. For an outdoor or damp location, check the complete installation, cable entries and connected fittings against their own ratings and instructions.
The listing references the Varilight V-COM module and Rako lighting controls. Confirm compatibility with the exact dimmer model and load before ordering. Mains-side wiring and installation should be completed by a qualified electrician in accordance with the product instructions.