Free Standard Delivery on orders over £75 except for large items. NEXT DAY delivery available for orders placed before 12:00
BROWSE
CART
Shopping Cart
0
COMPARE
WISHLIST

AR111 LED

SaleNew 12w LED AR111 230v dimmable12w LED AR111 230v dimmable

12w LED AR111 230v dimmable

£48.00  £14.98
Save: 69% off
SaleNew 12w LED AR111 12v12w LED AR111 12v

12w LED AR111 12v

£36.36  £11.98
Save: 67% off

AR111 LED reflector lamps provide directional light for accent and display applications. The AR111 name describes the lamp format; when replacing a lamp, check the fitting, supply voltage, connector and dimming method. This category currently lists two 12W LED versions with different electrical requirements.

Choose the correct supply

VersionSupply and driverDimming
12V AR11112V AC or DC. The product listing specifies compatible halogen AC transformers or constant-voltage DC LED drivers.Non-dimmable
230V AR111Supplied driver connects to a 230V AC mains supply.Mains-dimmable with a compatible dimmer.

These versions are not interchangeable. Never connect a 12V lamp directly to 230V mains. Check the existing transformer or driver, the load requirements and the wiring arrangement before ordering. If you are unsure which version is installed, ask a qualified electrician to confirm it.

Compare beam, colour and fit

The current product listings state a 111mm diameter, approximately 55mm depth including the connectors and a 30-degree beam angle. Both lamps use spade connections and an aluminium housing. Check the available space inside the fitting, including the depth behind the lamp, before choosing a replacement.

  • Both products are listed at 12W with a manufacturer-rated life of 30,000 hours.
  • Warm white is listed at 2700K with 600 lumens; natural white is listed at 4200K with 720 lumens.
  • The 12V version is listed as non-dimmable. The 230V version is listed as dimmable; the result depends on the dimmer and driver combination.

Colour temperature and lumen output depend on the selected variant, so confirm the option shown on the individual product page. Lumens indicate light output; they are more useful than wattage alone when comparing brightness.

Check dimmer and transformer compatibility

For a 12V installation, match the lamp to a suitable 12V AC or constant-voltage DC supply as specified for that product. For the mains version, use the supplied driver and confirm that the chosen dimmer is compatible with its load and dimming method. Not every dimmer gives the same low-level performance, even when a lamp is described as dimmable.

AR111 LEDs are commonly selected for focused retail, display and interior accent lighting. Compare the 30-degree beam, colour temperature, output and fit against the task and the existing installation. Check the individual product specification before ordering, especially when replacing a halogen lamp or retaining an existing transformer or dimmer.

New Products For November - AR111 LED

Monthly Specials

Back to Top