Free Standard Delivery on orders over £75 except for large items. NEXT DAY delivery available for orders placed before 12:00
BROWSE
CART
Shopping Cart
0
COMPARE
WISHLIST
GU10 Lamp Holder
  • In Stock:  240

GU10 Lamp Holder

£1.50
This GU10 lamp holder is supplied with 200mm leads for use in a compatible GU10 lighting fitting. Check the holder, leads, luminaire and intended GU10 lamp against the fitting manufacturer's instructions before ordering. The holder alone does not establish that existing wiring, transformer or...
Qty Discounts Off Price
1-4
£1.50
5-9
£1.40
10-24
£1.35
25-49
£1.28
50+
£1.20
Add to Cart:
Description

This GU10 lamp holder is supplied with 200mm leads for use in a compatible GU10 lighting fitting. Check the holder, leads, luminaire and intended GU10 lamp against the fitting manufacturer's instructions before ordering. The holder alone does not establish that existing wiring, transformer or fitting is suitable for a different lamp system.

GU10 and MR16 fittings use different connections

GU10 and MR16 are not interchangeable lamp-holder types. Some MR16 spotlight systems operate at 12V through a transformer or LED driver, while GU10 fittings are commonly supplied at mains voltage. Do not identify the supply from bulb shape alone: read the original lamp marking and check the luminaire documentation.

Changing an MR16 holder to GU10

Replacing a low-voltage MR16 holder with GU10 is more than a bulb change. The 200mm GU10 holder does not convert a 12V MR16 circuit, replace a transformer or confirm that the fitting is suitable for mains-voltage operation. Do not bypass, remove or discard an existing transformer as a DIY step, and do not connect a GU10 holder to a circuit until the complete installation has been checked.

If you are changing the holder or altering fixed wiring, ask a registered electrician to assess the supply, wiring, luminaire, earthing and installation requirements. Follow the fitting manufacturer's instructions and local electrical safety requirements.

Before you order

  • Confirm that the fitting is designed for a GU10 lamp holder.
  • Check the supply voltage and wiring arrangement from the fitting documentation.
  • Measure the available space and confirm that 200mm leads are suitable for the installation.
  • Verify that the GU10 lamp, holder and luminaire are compatible as a complete system.

If the existing fitting uses MR16 lamps and you are unsure whether it is a low-voltage system, stop and have it checked before ordering a different holder. This product is a GU10 lamp holder with leads, not an MR16-to-GU10 conversion kit.

Reviews (1)
5.00
Average Rating
(1 Review)
5
100%
4
0%
3
0%
2
0%
1
0%


  • by Glenn Atkinson on 02/25/2017

    Prompt delivery, great product, great service. We will definitely use again

Customers also purchased

Back to Top