Free Standard Delivery on orders over £75 except for large items. NEXT DAY delivery available for orders placed before 12:00
BROWSE
CART
Shopping Cart
0
COMPARE
WISHLIST

12V LED Drivers

12V LED drivers for LED strip lights and cabinet lighting

Shop 12V LED drivers and 12 volt DC LED power supplies for compatible low-voltage lighting. The product range shown here runs from 5W to 200W, including 7W and 18W drivers labelled for cabinet lights. Use the listings above to compare wattage, then confirm each model's output type, current, input supply, dimensions, IP rating and dimming details on its product page.

When replacing a driver, check the label on the existing unit and the lighting product's own specifications. The product voltage must match the driver's output. Wattage alone cannot tell you whether a driver is suitable.

How to choose a 12V LED driver

  1. Match the voltage. Use a 12V driver only with lighting specified for a compatible 12V supply. A 12V and a 24V system are not interchangeable. For a 24V setup, compare our 24V LED drivers.
  2. Match the driver type. Many LED tapes are designed for constant-voltage supplies; some LED modules require a constant-current driver. Check both product specifications before buying. If the module calls for constant current, browse constant-current LED drivers rather than choosing a unit by wattage alone.
  3. Calculate the connected load. Add the wattage of every tape section and fitting that will share the supply. For tape rated in watts per metre, multiply its stated watts per metre by the installed length, then include other loads. Keep the total within the chosen driver's rated output and follow the manufacturer's stated loading guidance.
  4. Check dimming. Dimming depends on the driver, LED load and control method. The 5W 12V LED driver listing is marked non-dimmable, so do not assume every 12V model can be dimmed. If you need dimming, check the individual listing and browse dimmable LED drivers.
  5. Check the installation conditions. Compare the model's dimensions, connections and enclosure rating with the available space and location. For example, the 5W model is listed as IP20. Check the product-specific rating before using any driver where moisture or dust may be present.

Choosing wattage for LED tape

Use the tape manufacturer's wattage to estimate the connected load. For example, 5 metres of tape rated at 4.8W per metre uses 24W (4.8 × 5), before adding other connected loads. Confirm that the chosen driver supports the total under its specified operating conditions. Some driver manufacturers recommend additional wattage headroom; the required margin depends on the model and application, so follow the relevant product guidance rather than applying one figure to every installation. Never exceed the product's stated rating.

Need the tape as well as the power supply? Browse our 12V LED strip lights. Match the tape, driver and any dimmer to their individual specifications before connecting them.

Monthly Specials

Back to Top