There is no product that matches the search criteria.
Your cart is empty.
Product 19/30
The CT-110A is a remote controlled LED dimmer switch for compatible 12V or 24V single-colour LED tape. The product listing specifies an RF remote control. Match the controller voltage to the tape and power supply. The listing describes single-colour tape; it does not state support for RGB or RGBW strips.
The listed maximum current is 15A: up to 180W at 12V or 360W at 24V. For 14.4W/m tape, the listing gives example maximum lengths of 12.5m at 12V or 25m at 24V; it says these lengths can be doubled for 7.2W/m tape. These are maximum calculations from the stated ratings, not a guarantee that every layout can use the full length. Check the controller label, tape data and power-supply capacity, then stay within the lowest applicable limit. Calculate the tape load using watts per metre multiplied by the installed length.
The product details describe continuous brightness control across 256 levels, preset levels of 0%, 25%, 50%, 75% and 100%, and two flashing modes. Confirm that the tape and power supply are compatible with the controller before ordering.
The controller measures 154 × 41 × 32mm. Check mounting clearance, connector compatibility and the product instructions before purchase. Follow the supplied instructions for the low-voltage connections; have mains-side work on the power supply completed by a qualified electrician. This product description is not wiring guidance.