There is no product that matches the search criteria.
Your cart is empty.
AR111 LED reflector lamps provide directional light for accent and display applications. The AR111 name describes the lamp format; when replacing a lamp, check the fitting, supply voltage, connector and dimming method. This category currently lists two 12W LED versions with different electrical requirements.
These versions are not interchangeable. Never connect a 12V lamp directly to 230V mains. Check the existing transformer or driver, the load requirements and the wiring arrangement before ordering. If you are unsure which version is installed, ask a qualified electrician to confirm it.
The current product listings state a 111mm diameter, approximately 55mm depth including the connectors and a 30-degree beam angle. Both lamps use spade connections and an aluminium housing. Check the available space inside the fitting, including the depth behind the lamp, before choosing a replacement.
Colour temperature and lumen output depend on the selected variant, so confirm the option shown on the individual product page. Lumens indicate light output; they are more useful than wattage alone when comparing brightness.
For a 12V installation, match the lamp to a suitable 12V AC or constant-voltage DC supply as specified for that product. For the mains version, use the supplied driver and confirm that the chosen dimmer is compatible with its load and dimming method. Not every dimmer gives the same low-level performance, even when a lamp is described as dimmable.
AR111 LEDs are commonly selected for focused retail, display and interior accent lighting. Compare the 30-degree beam, colour temperature, output and fit against the task and the existing installation. Check the individual product specification before ordering, especially when replacing a halogen lamp or retaining an existing transformer or dimmer.