Free Standard Delivery on orders over £75 except for large items. NEXT DAY delivery available for orders placed before 12:00
BROWSE
CART
Shopping Cart
0
COMPARE
WISHLIST

LED G4 and G6.35 Capsule Bulbs

Choosing a G4 or G6.35 LED capsule

G4 and G6.35 lamps are compact capsule bulbs, but their pins are spaced differently. A G4 cap has 4 mm pin spacing; a G6.35 cap has 6.35 mm spacing. Check the old lamp, holder and luminaire markings before ordering. The base must fit correctly, and matching the pin spacing alone does not confirm that a lamp is suitable for the fitting.

Voltage is a separate check. This range includes 12V G4 and G6.35 LED capsules, plus a 230V AC G6.35 option. A 12V capsule must only be used with a suitable 12V supply; a mains-voltage lamp must be rated for the luminaire. Never choose between them by appearance alone. If your fitting has a transformer, check its output, minimum load and LED compatibility: a lower-wattage LED may not work correctly with a transformer designed for a higher halogen load.

Compare the available G4 and G6.35 bulbs

  • G4 12V dimmable LED capsule: the product specification lists 2.8W, 220 lumens and 2700K warm white. It measures 42 mm long including the pins and 17 mm across.
  • G6.35 12V dimmable LED capsule: the product specification lists 3.5W, 300 lumens and 2700K warm white. Its length is 54 mm including the pins, with a 15 mm diameter.
  • G6.35 230V AC dimmable LED capsule: the product specification lists 3W, 220 lumens and 2700K warm white. Its length is 53 mm including the pins, with a 15 mm diameter.

These measurements are useful when checking tight shades, enclosed fittings and small lamp holders. Compare the complete bulb dimensions, including pin length, with the space available. Product specifications can vary by model, so use the individual listing as the final check for voltage, output, size and stock status.

Will a G4 LED bulb work with my transformer or dimmer?

Some G4 LED lamps are dimmable, but dimming depends on the exact lamp and the rest of the circuit. The product page for each capsule identifies its dimming status. For a dimmable G4 LED bulb, use a compatible LED dimmer and, where the fitting has a low-voltage driver or transformer, confirm that the driver supports LED loads and the lamp’s stated supply. An existing halogen dimmer or transformer is not automatically compatible with an LED capsule.

If you are replacing a halogen lamp, compare light output in lumens and colour temperature as well as wattage. The models listed above are 2700K warm white, with different stated lumen outputs. A lower wattage by itself does not tell you whether the light level will suit your room or task.

Before ordering

  • Confirm whether the holder is G4 (4 mm pins) or G6.35 (6.35 mm pins).
  • Match the lamp’s stated supply voltage to the fitting and its driver or transformer.
  • Check that the bulb’s length and diameter fit inside the luminaire.
  • For dimming, confirm compatibility for the lamp, LED dimmer and any low-voltage driver.

For fixed mains wiring or uncertainty about the fitting’s voltage, ask a suitably qualified electrician to check the installation. Selecting the correct G4 LED bulb or G6.35 capsule starts with the cap and supply requirements printed on the existing lamp and fitting.

New Products For November - LED G4 and G6.35 Capsule Bulbs

Monthly Specials

Back to Top