Free Standard Delivery on orders over £75 except for large items. NEXT DAY delivery available for orders placed before 12:00
BROWSE
CART
Shopping Cart
0
COMPARE
WISHLIST

Halogen G4 Capsule Bulbs

LED G4 and G6.35 Capsule Bulbs

Find G4 LED bulbs for compatible low-voltage fittings at Saving Light Bulbs. Our range includes 12V G4 LED capsules and selected dimmable models, alongside separate G6.35 capsule lamps. These compact bulbs are often used in decorative lighting, table lamps and cabinet fittings.

Shop 12V G4 LED capsules

A G4 capsule has two pins spaced 4mm apart. Before ordering, check the existing lamp marking, the operating voltage and the physical space inside the light. Our listed 12V G4 3W dimmable capsule is specified for 12V AC or DC operation and warm-white light; compare its dimensions and dimming requirements with your fitting.

When replacing an older G4 halogen capsule, a compatible LED may use less electricity. However, the wattage alone will not tell you whether the replacement is as bright. Look at the lumen rating and colour temperature on the product page.

G4 or G6.35? Check the pin spacing

G4 and G6.35 capsules look similar, but they are not the same fitting. G4 uses 4mm pin spacing; G6.35 uses 6.35mm. Our category includes G6.35 options, with different voltages depending on the model. Never choose a capsule on its appearance alone: match both the pin spacing and operating voltage.

Dimmable G4 LED bulbs and transformers

Not every G4 LED capsule is dimmable. If your fitting has a dimmer, choose a product marked dimmable and check compatibility with the existing transformer or driver. Some older halogen transformers require a minimum load and may not work reliably with low-wattage LEDs.

If you are planning a new installation, see our 12V LED drivers for products designed for compatible LED lighting. Have any electrical changes checked by a qualified installer.

Check these details before ordering

  • Cap: G4 or G6.35 pin spacing.
  • Voltage: 12V AC/DC or the exact supply stated for the chosen lamp.
  • Size: body width and total length, including pins.
  • Light: lumens, warm or cooler colour temperature, and beam spread.
  • Controls: dimmability and transformer/driver compatibility.

Understanding 12V G4 LED replacements

Most G4 lamps in this range are intended for a 12V lighting system, not direct connection to the usual UK mains supply. The old bulb may have been powered through a transformer built into the fitting or located nearby. When moving from halogen to LED, check whether that transformer supports low-wattage LED lamps. An unsuitable unit can cause intermittent light, flickering or a lamp that does not start reliably.

Some G4 products are specified for both 12V AC and DC, while other low-voltage lamps have more particular requirements. Use the exact voltage and supply information on the chosen listing. The word “12V” alone is not enough to confirm that every transformer and LED capsule will work together.

Check capsule size as well as pin spacing

G4 LEDs can have a different body shape from traditional glass halogen capsules. That matters in shallow cabinet fittings, small display lights and decorative shades. Measure the available width and depth, allowing for the pins, cover and any heat-clearance requirements. If the original lamp sits behind a tight diffuser, compare the replacement’s stated measurements before ordering.

For a fitting containing several G4 bulbs, select matching light colours and outputs wherever possible. Check the lumen figures rather than assuming that a higher LED wattage is needed. A consistent group of capsules usually gives a more even result than mixing older halogen lamps with different LED models.

Dimming and replacement planning

If your G4 lights are on a dimmer, confirm that both the replacement lamp and the driver or transformer support that arrangement. A product described as dimmable may still need compatible controls. Where an existing system is unreliable or poorly documented, have the supply and control gear assessed rather than repeatedly trying different bulbs.

A useful buying checklist is the old lamp’s pin spacing, voltage, body size, brightness, colour temperature and dimmable status. Keeping those details together helps you choose a direct replacement where one is suitable, or identify when an electrical change is required first.

Browse our G4 and G6.35 LED capsules above to select the correct replacement.

New Products For November - Halogen G4 Capsule Bulbs

Back to Top