There is no product that matches the search criteria.
Your cart is empty.
Product 11/13
This 10W LED R7s lamp is a linear J118-format replacement for compatible 118mm R7s fittings. It can replace certain J118 halogen lamps, provided the lamp dimensions and electrical requirements suit the existing fixture. R7s lamps are used in some floodlights and wall uplighters, but compatibility depends on the holder and fitting.
Measure the existing lamp and compare its length, width and depth with the dimensions above. Check that the two R7s holders retain the lamp securely and that there is enough space for the wider LED body, especially in enclosed fittings. Confirm the fitting’s supply requirements and any restrictions in its instructions; do not assume that every halogen floodlight accepts an LED R7s replacement.
Switch off and isolate the light before changing a lamp, and allow a recently used halogen bulb to cool. If fitting changes or electrical work are needed, use a qualified electrician. Choose on light output and application as well as wattage; the listing does not provide a lumen figure, so do not infer a halogen-equivalent brightness from watts alone.
No. It is 118mm long, but the 54 × 35mm body is wider than many linear halogen lamps. Check holder spacing, available clearance and the fixture’s compatibility information first.
This product is listed at 6000K, which is a cool white colour temperature.
Perfect replacement for some halogen bulbs in wall uplighters, that gave off far too much heat. I was surprised and pleased to find that they fitted into the light fitting
Just the job. Fits and works really well. I hope it last as long as expected.
excellent straight replacement for 250w halogen bulb, massive power saving only slight reduction in lighting,
This lamp is a simple one for one replacement, and provides ample light output in a room up-lighter although using a great deal less power and arunning lot cooler than the conventional very hot halogen ! Quite a pleasant light colour to watch television by.