There is no product that matches the search criteria.
Your cart is empty.
Product 5/19
This 2D LED 5W 2-pin GR8 lamp is a replacement option for fittings that accept a 16W fluorescent 2D bulb, subject to fitting and control-gear compatibility. Its listed output is 550lm. Choose Warm White (2,700K) or Natural White (4,200K) from the Light Colour option above.
The lamp measures 135 × 135mm across, with a listed overall thickness of 30mm including the holder. A separate 2-pin lamp holder is supplied for use if required. Before ordering, check the base, available space and electrical arrangement in the existing fitting. Do not assume compatibility with every 2D fitting or control gear.
Follow the product’s supplied installation instructions for the specific fitting and control gear. Earlier generic wiring directions have been removed because the correct connection depends on the installation. Isolate the supply before work; any fixed-wiring change should be assessed and completed by a qualified electrician.
Select Warm White for a warmer appearance or Natural White for a cooler white appearance. Compare the listed 550lm output with the light needed for the room and check the existing diffuser or cover before fitting. Current price, stock and colour options are shown above. See Delivery & Returns for delivery and collection information.
Pleased to find these bulbs available to replace the existing 16w fluorescent tubes. They are the lowest wattage I could find and plenty bright enough for my kitchen. Easy to fit once I figured out how to remove the lenses over the light fitting.
The replacement for a 2D fluorescent tube was easily installed when the existing tube failed. The quality of light and speed of operation is very impressive while a worthwhile saving on electrify consumption is delivered. The flat nature of the light element means that it best to use it as a downlighter because this provides a good spread of light onto the pathway beneath it. The quality of light is also impressive.
Whilst this is a great replacement fixture when the lamp is attached to a bulkhead I have mine fixed to underneath of a car port and the light output is great directly downwards but there is little side spread as there was on the original tube fitting. The long life and reduced electricity use will be a great saving though.