Free Standard Delivery on orders over £75 except for large items. NEXT DAY delivery available for orders placed before 12:00
BROWSE
CART
Shopping Cart
0
COMPARE
WISHLIST
Varilight V-Com Module MKP-100
  • In Stock:  18

Varilight V-Com Module MKP-100

£9.78
Varilight MKP-100 V-Com dimmer module The MKP-100 is a Varilight V-Com 1-gang dimmer module using TRIAC leading-edge control. The product listing specifies a maximum LED load of 100W and a maximum of 10 LED lamps. Both limits apply: check the connected lamp or driver ratings and do not exceed...
Qty Discounts Off Price
1-4
£9.78
5-9
£9.29
10-24
£9.10
25-49
£9.00
50+
£8.80
Add to Cart:
Description

Varilight MKP-100 V-Com dimmer module

The MKP-100 is a Varilight V-Com 1-gang dimmer module using TRIAC leading-edge control. The product listing specifies a maximum LED load of 100W and a maximum of 10 LED lamps. Both limits apply: check the connected lamp or driver ratings and do not exceed either limit.

Product specifications

  • Product code: MKP-100
  • Type: V-Com 1-gang dimmer module
  • Dimming technology: TRIAC leading edge
  • Maximum LED load: 100W, as listed
  • Maximum number of LED lamps: 10, as listed
  • Listed use: compatible dimmable LEDs and mains-dimmable LED drivers
  • Features: soft start, overload protection, adjustable minimum brightness and selectable operating modes
  • Dimensions: 52 × 26 × 42mm

Check lamp and driver compatibility

Use this module only with lamps or drivers marked as dimmable and compatible with leading-edge control. Confirm the exact product's minimum and maximum load guidance, the total connected load and the lamp-count limit before installation. A lamp's wattage alone may not describe the load seen by a dimmer, especially when LED drivers are involved. If the manufacturer provides a compatibility list, use it for the lamp or driver model.

Module and installation fit

This product is a dimmer module for replacing a compatible module or for use with a compatible Varilight Matrix dimmer grid system. Check whether a separate plate, grid or accessory is required for the intended installation, and confirm the 52 × 26 × 42mm dimensions and wiring arrangement before ordering.

Dimmer modules connect to mains lighting circuits. Have fixed wiring and installation carried out by a qualified electrician, following the product instructions and applicable electrical requirements. Isolate the circuit before work.

Reviews (0)
There are currently no product reviews.
Back to Top