There is no product that matches the search criteria.
Your cart is empty.
Product 9/11
A 6 button wireless control panel for the sleek design EOS range.
These panels use near field communication(NFC) and are configurable using the Rako Rasoft product.
This is the internal control unit which fits inside the EOS 6 button wireless plate and then into a standard single gang UK back box.
This unit comes as standard with 3 pre-set scenes, master raise and lower together with the off button, all of which can be configured for different operations with Rasoft.
If you require more than the number of items stocked please add another 1-2 days for delivery.
The RK EOS 6 is a compact wireless control module designed to form the core of an EOS wall plate setup. It works as part of a wider Rako lighting control system, allowing lighting to be managed without running control cabling through walls or ceilings. This makes it suitable for both retrofit projects and new installations where flexibility and speed of installation are important.
Because the module communicates wirelessly, it can be positioned exactly where it is needed. This gives installers greater freedom when planning layouts and helps keep finished walls clean and neat. It is a practical choice for residential properties, commercial spaces, and multi-room projects where reliable lighting control is required.
The RK EOS 6 is designed to be flush-mounted into standard UK single-gang back boxes. When installed behind the EOS cover plate, the unit sits neatly within the wall, maintaining a tidy and unobtrusive finished appearance. This makes it well-suited to modern interiors where visible hardware needs to be kept to a minimum.
Flush mounting also helps the control panel blend in as a natural part of the room, rather than an add-on. Whether installed in a home, apartment, or commercial space, the finished result seamlessly blends with surrounding fixtures and wall finishes.
This control module is powered by a lithium battery, allowing it to operate fully wirelessly. Because no mains power is required at the wall plate, installation can be completed without running additional cabling. This is especially useful in refurbishment projects where access behind walls is limited.
Battery-powered operation also means control panels can be placed in locations that would otherwise be impractical. Once installed, the module continues to operate reliably, supporting everyday use without the need for frequent maintenance.
One of the strengths of the RK EOS 6 is how intuitive it feels once installed. The button layout is easy to understand, which reduces the need for explanation. Users can adjust lighting quickly without relying on apps or complex interfaces.
This is particularly useful in shared environments such as rental properties, meeting rooms, or hospitality settings. Guests and staff can control lighting with confidence, which helps avoid confusion and unnecessary adjustments.
Each button on the RK EOS 6 can be programmed to issue single or multiple commands. Buttons can trigger lighting scenes, adjust levels, or control separate Rako rooms, giving a high level of flexibility. Internal macro functions enable multiple actions to be performed with a single button press.
This flexibility makes the control module suitable for both simple and more advanced lighting setups. It can be used to manage a single space or act as part of a larger system covering multiple areas within a property.
Programming is carried out using Rako Rasoft Pro software with the RAMPI programming interface. This allows installers to connect a laptop and configure button behaviour, room addressing, and scene control accurately. Near field communication allows updates to be made quickly without removing the module from the wall.
This setup makes it easier to fine-tune lighting behaviour during installation or after handover. Changes can be made as requirements evolve, without replacing hardware or disturbing finished surfaces.
For larger projects, the RK EOS 6 allows the same control layout to be used across multiple rooms. Installers can apply consistent programming so users experience the same button behaviour throughout a building.
This consistency is valuable in hotels, apartment blocks, and commercial properties where predictable lighting control helps improve usability. People can move between spaces without needing to learn new controls each time.
Lighting needs often change over time as spaces are updated or repurposed for new uses. The RK EOS 6 supports this by allowing buttons to be reprogrammed rather than replaced. Scenes can be updated, functions reassigned, and rooms readdressed as needed.
This makes the module a sensible long-term choice for both homeowners and businesses. The system can evolve without additional disruption, helping protect the original investment.
The RK EOS 6 control module is designed to be used with the RP EOS 6 cover plate, which is required for installation. A range of finishes is available to suit different interior styles, including satin chrome and matt black.
It can be combined with other Rako control modules, dimmers, and interfaces, allowing systems to be expanded over time. This makes it suitable for projects that may start small and grow in future phases.
If you are planning a Rako lighting system or upgrading an existing setup, the RK EOS 6 offers a flexible and discreet control solution. Add the module to your basket today or contact our team if you would like help confirming compatibility, accessories, or programming requirements.
The RK EOS 6 is a wireless control module that fits behind an EOS wall plate and is used to control lighting scenes, levels, and functions within a Rako lighting system.
No. A lithium battery powers the module, so no mains connection is required at the wall plate.
Yes. Each button can be programmed to trigger different actions such as scenes, raise and lower functions, or control of separate rooms.
Programming is carried out using Rako Rasoft Pro software and the RAMPI programming interface, allowing settings to be configured via a laptop.
Yes. Its wireless and battery-powered design makes it particularly suitable for retrofit projects where running new cabling would be difficult.
