{"id":1351,"date":"2018-05-04T12:15:33","date_gmt":"2018-05-04T11:15:33","guid":{"rendered":"http:\/\/www.saving-light-bulbs.co.uk\/blog\/?p=1351"},"modified":"2026-10-18T16:38:17","modified_gmt":"2026-10-18T15:38:17","slug":"why-light-output-should-be-measured-in-lumens-not-watts","status":"publish","type":"post","link":"https:\/\/www.saving-light-bulbs.co.uk\/blog\/why-light-output-should-be-measured-in-lumens-not-watts\/","title":{"rendered":"Why Light Output Should Be Measured In Lumens &amp; Not Watts"},"content":{"rendered":"<p><a href=\"https:\/\/www.saving-light-bulbs.co.uk\/wordpress\/wp-content\/uploads\/2018\/05\/Lumens-vs.-Watts1.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-1352\" src=\"https:\/\/www.saving-light-bulbs.co.uk\/wordpress\/wp-content\/uploads\/2018\/05\/Lumens-vs.-Watts1.jpg\" alt=\"Graphic comparing lumens and watts for light bulbs\" width=\"474\" height=\"233\" \/><\/a><\/p>\n<p>When you choose a replacement bulb, compare its light output in lumens rather than relying on watts to judge brightness. Lumens tell you how much visible light the lamp produces; watts tell you how much electrical power it uses. The figures answer different questions, so checking both helps you choose a bulb that gives the light you need without using more power than necessary.<\/p>\n<h2>Lumens vs watts: what does each figure measure?<\/h2>\n<p>A lumen (lm) is the unit of luminous flux: the total visible light emitted by a source, weighted for how the human eye responds to different wavelengths. A higher lumen rating generally means more total light from the lamp. The <a href=\"https:\/\/www.nist.gov\/pml\/special-publication-330\/sp-330-section-2\">NIST Guide to the SI<\/a> lists the lumen as a unit of luminous flux.<\/p>\n<p>A watt (W) is a unit of power. On a bulb, the wattage tells you the electrical power the lamp is designed to use. It does not tell you how bright the bulb will be. Two lamps with the same wattage can produce different lumen outputs because their technology and design differ.<\/p>\n<p>For that reason, there is no single watts-to-lumens conversion that works for every bulb. A wattage-equivalence chart can offer a rough starting point when replacing an older lamp, but always check the actual lumen rating on the product.<\/p>\n<p><a href=\"https:\/\/www.saving-light-bulbs.co.uk\/wordpress\/wp-content\/uploads\/2018\/05\/Lumens-vs.-Watts2.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-medium wp-image-1353\" src=\"https:\/\/www.saving-light-bulbs.co.uk\/wordpress\/wp-content\/uploads\/2018\/05\/Lumens-vs.-Watts2-300x168.jpg\" alt=\"Lumens and watts comparison graphic\" width=\"474\" height=\"233\" \/><\/a><\/p>\n<h2>What is luminous efficacy?<\/h2>\n<p>Luminous efficacy describes how much light a lamp produces for the power it uses. For a lamp, divide its lumen output by its wattage to get lumens per watt (lm\/W). This is sometimes called the lumen-to-watt ratio. A higher lm\/W value means the lamp produces more lumens for each watt, which can help when comparing the energy efficiency of products with similar light output.<\/p>\n<p>For example, a 400-lumen lamp using 5 watts produces 80 lm\/W. A 400-lumen lamp using 4 watts produces 100 lm\/W. Both have the same stated light output, while the second example uses less power. This comparison does not tell you which lamp has the right beam, colour, dimming performance or fitting for your room, so check those details as well.<\/p>\n<p>LED bulbs often provide a given lumen output using less power than older incandescent or halogen lamps, but performance varies by model. Compare the published lumens and watts for the specific products you are considering rather than assuming every LED has the same efficiency.<\/p>\n<p><a href=\"https:\/\/www.saving-light-bulbs.co.uk\/wordpress\/wp-content\/uploads\/2018\/05\/Lumens-vs.-Watts3.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-medium wp-image-1354\" src=\"https:\/\/www.saving-light-bulbs.co.uk\/wordpress\/wp-content\/uploads\/2018\/05\/Lumens-vs.-Watts3-300x168.jpg\" alt=\"Graphic illustrating light output and power use\" width=\"474\" height=\"233\" \/><\/a><\/p>\n<h2>What does light output ratio mean?<\/h2>\n<p>Light output ratio (LOR) is a separate term used for some luminaires, or complete light fittings. It compares the total light leaving the fitting with the light produced by its lamp or lamps outside the fitting. The ratio shows how much of the lamp output passes through the luminaire\u2019s optics. It is not the same as a bulb\u2019s lm\/W efficacy and is not a conversion from watts to lumens. The UK Government\u2019s <a href=\"https:\/\/etl.energysecurity.gov.uk\/products\/lighting\/efficient-white-lighting-units\">Energy Technology List<\/a> explains LOR and luminaire efficacy in its lighting criteria.<\/p>\n<p>When you are buying a replacement bulb, the most useful first comparison is usually the bulb\u2019s lumen output. LOR is more relevant when comparing fitting specifications, particularly where a fitting uses replaceable lamps and the manufacturer publishes the figure.<\/p>\n<h2>How to compare light output before you buy<\/h2>\n<ol>\n<li><strong>Start with lumens.<\/strong> Match the light output to the room and task. If the old bulb\u2019s package is available, use its lumen rating as a reference.<\/li>\n<li><strong>Check the cap and size.<\/strong> Confirm the fitting type, bulb shape and available space. A lamp with the right lumens will not help if it does not fit the holder.<\/li>\n<li><strong>Check voltage and compatibility.<\/strong> Match the lamp to the fitting and transformer where applicable. If the circuit is dimmed, confirm that the bulb is marked as dimmable and is compatible with the dimmer.<\/li>\n<li><strong>Compare watts and lm\/W.<\/strong> Once you have found suitable light output, compare the power use of compatible products. A higher lm\/W value indicates more lumens for each watt.<\/li>\n<li><strong>Choose the light appearance and spread.<\/strong> Check colour temperature, beam angle and whether the bulb is designed for a directional fitting, enclosed fitting or other specific use.<\/li>\n<\/ol>\n<h2>Why the brightest bulb is not always the best choice<\/h2>\n<p>Lumens describe the total light from a source, not exactly how bright a surface will look in your room. The beam angle, shade, reflector, distance from the surface, room layout and wall colour all affect where the light goes and how it feels. A focused spotlight can direct its light onto a small area; a wide-angle lamp spreads it more broadly.<\/p>\n<p>For a surface, illuminance is measured in lux (lx). One lux is one lumen of light falling on one square metre. This is why a room\u2019s lighting cannot be judged by bulb lumens alone: the number, position and distribution of the lamps also matter.<\/p>\n<p style=\"text-align: center\"><a class=\"button\" style=\"color: #fff\" href=\"https:\/\/www.saving-light-bulbs.co.uk\/led-bulbs-lamps\/\">Explore LED bulbs<\/a><\/p>\n<p><a href=\"https:\/\/www.saving-light-bulbs.co.uk\/wordpress\/wp-content\/uploads\/2018\/05\/Lumens-vs.-Watts4.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-medium wp-image-1355\" src=\"https:\/\/www.saving-light-bulbs.co.uk\/wordpress\/wp-content\/uploads\/2018\/05\/Lumens-vs.-Watts4-300x164.jpg\" alt=\"Light measurement comparison graphic\" width=\"474\" height=\"233\" \/><\/a><\/p>\n<h2>Lumens, lux and candelas: what is the difference?<\/h2>\n<p><strong>Lumens<\/strong> measure the total visible light emitted by a source. <strong>Lux<\/strong> measures the light falling on a surface. <strong>Candelas (cd)<\/strong> measure luminous intensity in a particular direction. Candela information can be useful when comparing directional lamps such as spotlights, where beam direction and concentration matter as well as the total lumen output.<\/p>\n<h2>Common questions about lumens and watts<\/h2>\n<h3>Are more lumens always brighter?<\/h3>\n<p>More lumens means more total light from the source, but it does not guarantee that the light will look brighter at every point in a room. Beam direction, distance, the fitting and the surrounding surfaces affect the result.<\/p>\n<h3>Can I convert watts to lumens?<\/h3>\n<p>Not with one universal formula. The relationship depends on the lamp\u2019s technology and design. Use lumens to compare light output, then check watts to compare power use.<\/p>\n<h3>Does a higher lm\/W rating mean better light?<\/h3>\n<p>It means more lumens per watt, which is useful for comparing energy efficiency. It does not by itself describe colour quality, dimmer compatibility, beam pattern or whether the lamp suits the fitting.<\/p>\n<h2>Further reading<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.nist.gov\/pml\/special-publication-330\/sp-330-section-2\">NIST Guide to the SI: units including the lumen and watt<\/a><\/li>\n<li><a href=\"https:\/\/etl.energysecurity.gov.uk\/products\/lighting\/efficient-white-lighting-units\">UK Government Energy Technology List: lighting terminology and performance criteria<\/a><\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"<p>When you choose a replacement bulb, compare its light output in lumens rather than relying on watts to judge brightness. Lumens tell you how much visible light the lamp produces; watts tell you how much electrical power it uses. The figures answer different questions, so checking both helps you choose a bulb that gives the &hellip; <a href=\"https:\/\/www.saving-light-bulbs.co.uk\/blog\/why-light-output-should-be-measured-in-lumens-not-watts\/\" class=\"more-link\">Continue reading <span class=\"screen-reader-text\">Why Light Output Should Be Measured In Lumens &amp; Not Watts<\/span> <span class=\"meta-nav\">&rarr;<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":1356,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2,4,1],"tags":[13,10,29,72,73],"class_list":["post-1351","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-light-bulb-general-information","category-technologies","category-uncategorised","tag-led","tag-leds","tag-lumens","tag-lumens-vs-watts","tag-watts"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.saving-light-bulbs.co.uk\/blog\/wp-json\/wp\/v2\/posts\/1351"}],"collection":[{"href":"https:\/\/www.saving-light-bulbs.co.uk\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.saving-light-bulbs.co.uk\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.saving-light-bulbs.co.uk\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.saving-light-bulbs.co.uk\/blog\/wp-json\/wp\/v2\/comments?post=1351"}],"version-history":[{"count":4,"href":"https:\/\/www.saving-light-bulbs.co.uk\/blog\/wp-json\/wp\/v2\/posts\/1351\/revisions"}],"predecessor-version":[{"id":3417,"href":"https:\/\/www.saving-light-bulbs.co.uk\/blog\/wp-json\/wp\/v2\/posts\/1351\/revisions\/3417"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.saving-light-bulbs.co.uk\/blog\/wp-json\/wp\/v2\/media\/1356"}],"wp:attachment":[{"href":"https:\/\/www.saving-light-bulbs.co.uk\/blog\/wp-json\/wp\/v2\/media?parent=1351"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.saving-light-bulbs.co.uk\/blog\/wp-json\/wp\/v2\/categories?post=1351"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.saving-light-bulbs.co.uk\/blog\/wp-json\/wp\/v2\/tags?post=1351"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}